Best Haircut for Oblong Face Men: Cuts That Add Width, Not Height


Published: 22 Nov 2026


An oblong face is long and narrow, with a forehead, cheekbones and jawline that are close in width and a chin that is rounded rather than square. The best haircut for oblong face men does not add more length. It adds width at the sides, keeps the top low and flat, and uses a fringe or a side part to show less of the forehead. In this guide, you will learn how to check your face shape, the simple rule that makes a long face look balanced, and the cuts that work for straight, wavy, curly and fine hair, plus clear barber wording you can copy, and honest notes on the cuts to avoid.

How to Tell If You Have an Oblong Face

Start with a mirror and pull your hair back so your full face shows. An oblong face looks like a long, narrow oval, and the length is clearly more than the width. The forehead, cheekbones and jawline are close in width, the sides look fairly straight, and the chin is rounded rather than square or sharp. A tape measure helps. Measure the length from your hairline to your chin, then measure the width across your cheekbones. Many guides put an oblong face near a ratio of 1.7 to 1, while an oval face sits closer to 1.5 to 1. If your face is about twice as long as it is wide, with similar widths at the forehead, cheeks and jaw, you likely have an oblong face. Also divide your face into thirds, from hairline to brow, brow to nose and nose to chin. In an oblong face, those thirds look similar, and the length stands out most.

From my chair, the tape measure test ends more guessing than any photo filter. I have measured clients who were sure they had an oval face, and the length told a different story. Once we knew the face was oblong, the fix was simple. We kept the sides fuller, kept the top low, and let a short fringe do the work. The face looked shorter the same day, with no drastic change.

Young man pulling his hair back in a mirror to check if he has an oblong face

The Simple Rule for an Oblong Face

The rule is short. Add width, do not add height. A good cut for an oblong face makes the face look wider at the cheekbones and temples, and shorter from hairline to chin. That is why a low fade works better than a high fade here, and why a fringe, a side part or side volume helps so much. Keep the top low and fairly flat, keep the sides fuller rather than tight, and let the hair fall forward or to the side instead of up. The top should stay around 2 to 3 inches in most cuts, with the sides kept long enough to show some width. When a cut follows that rule, the face looks more balanced at once, and the style still looks clean and simple.

In my own work, I start every oblong face consult with this rule, and I say it out loud so the client hears it. Width is our friend, height is not. I have seen a tall quiff add an inch to a face that did not need it, and I have seen a low, textured top take that inch away. The rule never fails me, and it keeps the consult short and clear.

Barber showing width at the sides of a young man's oblong face with a low textured haircut

Textured Crop with a Low Fade

The textured crop with a low fade is the safest first choice for an oblong face, and it scores highest in several live guides for a reason. The top stays around 1.5 to 2.5 inches, cut with choppy, tousled texture and pushed forward, so the forehead looks shorter. The sides stay fuller than a skin fade, with a low fade that blends low on the head and keeps width at the temples. A small amount of matte clay or texture powder, worked through with your fingers, gives the top a natural, piecey finish. It suits straight and wavy hair, it works for fine hair because the texture adds body, and it needs little time in the morning.

As a stylist, I reach for the textured crop first when a client with a long face wants something easy and modern. I keep the sides fuller than the client expects, and I cut the top forward so the fringe covers part of the forehead. Clients often tell me they get compliments the same week, and the cut still looks good as it grows out.

Textured crop with a low fade haircut for men with an oblong face, front and side view

Side Part and Deep Side Part

The side part is a classic cut that suits an oblong face because the part breaks the length across the forehead. Ask for a neat side part with medium length on top, combed to one side with a light hold pomade, and sides that are tapered or low faded rather than cut tight. A deep side part pushes the volume to one side, which adds width where the face needs it, and it works well for office and formal settings. It suits straight hair best, and it looks sharp with a clean part line. Keep the top low, and do not brush it up high, or the face will look longer again.

I use the side part a lot for clients who want to look neat without trying hard. A deep part with a little volume on one side changes the whole shape of the face. I comb it with a light hold pomade, keep the sides low faded, and the client walks out looking taller in confidence, not in face length.

Side part and deep side part haircut for men with an oblong face, front and side view

French Crop, Fringe and Curtains

A fringe is the fastest way to make an oblong face look shorter, because it covers part of the forehead and cuts the visible length. The French crop uses a short, textured fringe pushed forward, with short sides and a low fade. The Caesar is a close cousin, with a short, even fringe and neat sides. Curtains use a middle part with longer hair swept to each side, which adds width at the cheekbones and suits wavy hair well. A side swept fringe also works, swept across the forehead with layered sides. Keep the fringe messy or textured, not stiff, and style it with matte clay or a little sea salt spray.

From my chair, the fringe test is simple. I ask the client to look straight ahead, then I drop a short fringe onto the forehead. The face looks shorter at once. I keep the fringe textured, because a hard, straight line can look harsh, and a messy fringe is easier to style at home.

French crop, fringe and curtains haircut for men with an oblong face, front view

Ivy League, Crew Cut and Buzz Cut

Short, classic cuts can work well for an oblong face when the sides are not cut too tight. The Ivy League keeps the top a little longer than a crew cut, swept to the side with a little pomade or wax, and the tapered sides add a clean finish. The crew cut is shorter and simpler, with a low taper that keeps some width at the sides. A buzz cut can also work, but keep it even in length and avoid a very short grade, such as grade 1 or 2, with a high fade, because that can make the face look even longer. These cuts suit men who want low effort and a clean, classic look.

I recommend the Ivy League to clients who want a classic cut with almost no styling time. I keep the top just long enough to sweep to the side, and I taper the sides low. A buzz cut is different. I only suggest it when the length is even, because a very short buzz with tight sides shows the full length of the face.

Ivy League, crew cut and buzz cut haircuts for men with an oblong face, front and side view

Wavy, Layered and Medium Length Styles

Waves, layers and medium length hair are natural width builders for an oblong face. Layers around the cheekbones add side volume, and waves break the straight, long line of the face. Ask for long layers that reach cheekbone level, with the sides kept full rather than thinned out. A medium length cut with a side sweep, a shaggy layered cut, or a textured wavy cut all work. Use a volumising mousse or sea salt spray, and dry with a diffuser to keep the waves soft. Avoid very long hair with no layers, because flat length pulls the face down and makes it look longer.

In the chair, I see waves do half the work for free. I cut layers at cheekbone level, keep the sides full, and dry with a diffuser so the waves stay soft. The client who came in with flat, long hair leaves with a face that looks wider, and the style takes five minutes at home.

Wavy, layered and medium-length haircuts for men with an oblong face, front and side view

Beard and Glasses That Add Width

A beard can add width to an oblong face, but the shape matters more than the length. Keep the beard full at the sides and shorter at the chin, with a rounded shape that adds width at the jaw. A long, pointed beard does the opposite and makes the face look longer. Light stubble of about 5 millimetres, a short boxed beard, or a full beard kept shorter at the chin all work well. Glasses help too. Choose square or browline frames that are wide and strong across the face, because they break the length and add a horizontal line.

From my chair, a beard is a tool, not just a style. I trim the chin shorter and keep the cheeks full, and the face looks wider at once. I have fixed long, pointed beards that added length, and a rounded, shorter beard changed the whole balance. For glasses, I send clients to try wide, square frames first.

Shaped beards and glasses that add width for men with an oblong face, front and side view

Haircuts to Avoid for Oblong Face Men

Some cuts make an oblong face look longer, and they are easy to spot once you know the rule. Avoid a tall quiff or a tall pompadour, because height on top adds length. Avoid a high skin fade or a high fade with tight sides, because it removes the width you need. Avoid slicked back hair brushed straight up, spiky hair that points up, and a very short buzz with tight sides. A man bun or a top knot also pulls the eye up and makes the face look longer.

I have had to fix many of these cuts in my chair. The most common one is a high skin fade with a tall quiff, and the client always says the same thing. My face looks longer than before. We fix it by lowering the fade, keeping the sides fuller, and bringing the top down and forward.

Haircuts to avoid for oblong face men that make the face look longer

How to Ask Your Barber and Keep It Looking Good

Take a photo of the cut you want, from the front and the side, and show it to your barber. Say the words from this guide. Keep the top low and flat, about 2 to 3 inches, keep the sides fuller with a low fade or a low taper, and add a short fringe or a side part to shorten the forehead. Ask for texture on top, not height, and ask the barber to check the shape from the front before you leave. Book a trim every 3 to 4 weeks, sooner for a fade, and use a small amount of matte clay, matte paste or sea salt spray at home. Blow dry the fringe forward and out to the sides, and use a diffuser for waves.

As a stylist, I love it when a client shows a photo and uses clear words. It takes the guesswork out of the cut. I check the shape from the front, keep the sides fuller, and the client leaves knowing how to style it at home.

The best haircut for oblong face men is the one that adds width and keeps the top low. A textured crop with a low fade, a side part, a short fringe or a layered wavy cut all do that job well. Pick the cut that fits your hair type, show your barber a photo, and use the words from this guide. Your face will look shorter, wider and more balanced.

Man with oblong face asking his barber for the right haircut

Frequently Asked Questions

Men with oblong faces and different haircuts in a barbershop
What is the best haircut for an oblong face man?

The textured crop with a low fade is the best first choice. The short, forward fringe shortens the forehead, and the fuller sides add width. A side part, a French crop or curtains also work well when the top stays low.

What haircut should an oblong face avoid?

Avoid tall quiffs, tall pompadours, high skin fades and very short buzz cuts with tight sides. They add height or remove width, and both make a long face look longer.

Is a low fade good for an oblong face?

Yes. A low fade is the best fade for an oblong face, because it keeps width low on the head and blends the sides without cutting them tight. A low taper works the same way. Avoid a high fade or a skin fade that starts high.

Can men with an oblong face have long hair?

Yes, but keep it layered and medium in length, with volume at the sides and layers at cheekbone level. Very long, flat hair with no layers pulls the face down and makes it look longer.

What beard suits an oblong face?

A full beard that is fuller at the sides and shorter at the chin suits an oblong face, because it adds width at the jaw. Light stubble of about 5 millimetres also works. Avoid a long, pointed beard, because it adds length to the chin.

Best Haircut for Round Face Men

Best Haircut for Oval Face Men

Low Taper Fade Haircut for Men

Textured Crop Haircut for Men




Muhammad Asim Avatar

Muhammad Asim is a certified barber with 10+ years of experience in modern men’s grooming, fades, beard styling, and trend-focused hair transformations.


Please Write Your Comments
Comments (0)
Leave your comment.
Write a comment
INSTRUCTIONS:
  • Be Respectful
  • Stay Relevant
  • Stay Positive
  • True Feedback
  • Encourage Discussion
  • Avoid Spamming
  • No Fake News
  • Don't Copy-Paste
  • No Personal Attacks
`