Hairstyles for Diamond Face Shape: Styles That Balance Your Features


Published: 18 Nov 2026


A diamond face shape has wide cheekbones, a narrow forehead and a pointed chin, and the right hairstyle can make those features look balanced instead of sharp. In this guide, I will show you the best hairstyles for diamond face shape for men and women, in plain words and with real advice from the chair.

The goal is simple. Add width where your face is narrow, at the forehead and the jaw, and soften the width at your cheekbones.

When you do that, your bone structure looks strong, not harsh, and almost any length can work, from a short crop to long layers. In this guide, I will also show you which styles to avoid, how to style each look at home, and what to say to your barber or stylist.

How to Tell If You Have a Diamond Face Shape

Start with a mirror and a flexible tape, because the shape is easy to check at home. Measure your forehead just above the eyebrows, your cheekbones just below the outer corners of your eyes, and your jawline just below your chin. Then measure the length of your face, from your hairline to the tip of your chin. On a diamond face, the cheekbones are the widest measurement, the forehead and the jaw are both narrower, and the chin comes to a soft point. The face is also a little longer than it is wide, which is why the shape looks like a diamond.

From my chair, I start with a simple check, because many people are told they have an oval face when they really have a diamond face. I measure the cheekbones first, because that is the part that decides it. If the cheekbones are clearly wider than the forehead and the jaw, and the chin has a point, you have a diamond face, and the styles in this guide will suit you.

Woman measuring her cheekbones with a tape measure to check for a diamond face shape

The Simple Rule for a Diamond Face

The rule for a diamond face is the opposite of what most people expect. Do not try to hide your cheekbones, and do not add bulk right next to them. Instead, add width where the face is narrow, at the forehead and around the jaw, and keep the sides soft so the cheekbones look strong, not sharp. A little height at the crown helps too, because it makes the face look longer and more balanced. Think of these as guides, not strict rules, because your hair texture and the time you want to spend styling matter too.

In my chair, I explain this rule before I pick up the scissors, because it makes every other choice easy. If a style adds width at the forehead or the jaw, it usually works. If it adds width at the cheekbones, it usually does not. I have seen the same face look completely different with a deep side part and soft layers, and that change takes only a few minutes.

Hairstylist adding width at the sides of a woman's wavy hair to balance a diamond face shape

Side Parts and Deep Side Parts

A side part is the fastest way to make a diamond face look wider at the forehead. The part creates a horizontal line across the top of the face, and that line adds width where the forehead is narrow. A deep side part works even better, because it brings a sweep of hair across the forehead and breaks up the straight lines of the face. Let the longer side fall over one shoulder or sweep across the brow, and keep the shorter side neat. A classic side part, a deep side part, a side swept fringe and a parted fringe all use the same idea, and they work for short, medium and long hair.

From my chair, a deep side part is the first change I suggest when someone with a diamond face wants a quick fix. I part the hair low on one side, sweep the top across, and the forehead looks wider at once. It also works well with a low taper on the sides for men, because the taper keeps the shape clean without adding width at the cheekbones.

Woman with a deep side part and soft layers that widen the forehead for a diamond face shape

Face-Framing Layers and Soft Layers

Face framing layers are the most useful cut for a diamond face, because they let you put softness exactly where you need it. Ask for layers that start near the cheekbone and fall past the jaw, and keep the ends soft and choppy rather than blunt. The layers break up the straight line of the face, and they draw the eye to the jaw instead of the cheekbones. Long layers work the same way on longer hair, and they add movement without adding width at the wrong place. A soft, wispy fringe or a curtain fringe pairs well with layers, because it covers part of the forehead and adds width at the top.

In my chair, I cut face framing layers a little longer than the client asks for, because hair springs up as it dries and short layers can end right at the cheekbones. I keep the shortest piece near the jaw, not the cheek, and I texturize the ends so the line stays soft. That small choice makes the whole cut look lighter.

Woman with soft face framing layers and gentle waves that soften cheekbones for a diamond face shape

Bobs and Lobs That Add Width at the Jaw

A chin length bob or a collarbone lob is one of the best choices for a diamond face, because the ends sit right where the face is narrow. Ask for a bob that ends at the chin or just below it, with soft, rounded ends and a few layers through the back. The width of the bob fills out the jaw, and the face looks more balanced at once. A French bob with a soft fringe works the same way, and a long bob with waves adds even more width at the jaw. Keep the ends soft, because a hard blunt line at the chin can make the jaw look heavy. If you are not sure whether a bob or a lob suits you, our guide to the best haircut for square face women shows how the same idea softens a strong jaw.

From my chair, the lob is the safer choice if you have never had short hair. I cut it to the collarbone first, and we can always take it shorter at the next visit. The rounded ends matter more than the exact length, because a bob with soft ends frames the jaw without a hard line.

Woman with a chin-length bob with soft waves that adds width at the jaw for a diamond face shape

Long Layers, Waves and Curls

Long hair suits a diamond face when it has layers, waves or curls, because the movement adds width at the jaw and the forehead. Ask for long layers that start below the chin, and add soft waves with a curling iron or a diffuser if your hair is naturally wavy. Curls are even better, because the body and bounce widen the face in a soft way. A butterfly cut, with short layers on top and long layers below, gives the same effect, and it keeps the length you love. Avoid long hair that is flat and straight all the way down, because it has no width at the forehead or the jaw, and the cheekbones stand out more.

In my own work, I have seen long, flat hair make a diamond face look sharper, and a few soft waves change the whole look. I use a large curling iron, wrap the hair away from the face, and break the curls up with my fingers so they look natural. A little sea salt spray or texturizing spray keeps the waves in place without making the hair stiff.

Woman with long layered hair with soft waves and curls that add width for a diamond face shape

Short and Medium Styles for Men

Men with a diamond face have plenty of strong short options. A textured crop or a French crop adds a little width at the forehead, and the textured top softens the cheekbones. A textured quiff does the same thing, with more height at the front, and a messy fringe is an easy low maintenance choice. A classic side part, a comb over or a sweeping fringe also works, because the side sweep adds width at the forehead. Keep some fullness on the sides, and ask for a low taper fade haircut for men instead of a skin fade, because very short sides make the face look sharper. A buzz cut with a mid fade, a crew cut or a short afro can work too, if the top keeps some texture.

In my chair, the textured crop is the cut I reach for most with a diamond face, because it is easy to style and it flatters almost everyone. I keep the fringe a little longer and push it to one side, and I use a matte paste so the top stays in place without shine. Most of my clients style it in five minutes in the morning.

Young man with a short textured crop haircut in a barbershop, a short to medium style for a diamond face shape

Pompadour, Slick Back and Longer Styles for Men

Longer styles work well for men with a diamond face, as long as the volume sits at the forehead and not at the cheekbones. A pompadour adds height at the front, which lengthens the face and draws the eye up. A slicked back style does the same, and it looks sharp with a low taper on the sides. Long waves, long layers or a man bun also suit a diamond face, because the length adds width around the jaw. A high top fade or a faux hawk can work too, but keep the sides full rather than shaved tight. If your face is close to oval, our guide to the best haircut for oval face men can help you compare the two shapes.

In my own work, I like a pompadour on a diamond face because the height at the front changes the whole balance of the face. I blow dry the top up and back, add a little pomade or clay, and keep the sides neat with a classic taper. It takes ten minutes to style, and it lasts all day.

Man with a voluminous pompadour slicked back in a barbershop, a longer style for a diamond face shape

Beard, Glasses and Hats That Balance a Diamond Face

A beard is one of the best tools a man with a diamond face can use, because it adds width right where the face is narrow. A short box beard, a balbo beard or a Garibaldi beard fills out the jaw and softens the pointed chin. Keep the beard a little fuller at the chin and shorter at the cheeks, so it does not add width at the cheekbones. Glasses help too. Rectangle, oval and aviator frames add width at the top of the face, and a cat eye frame works well for women. A hat with a structured brim, like a fedora, or a soft beanie also adds width at the forehead and balances the shape.

In my chair, I often suggest a short box beard to men who want a stronger jawline without a big change. I keep the cheeks clean and the chin full, and I use beard oil every day so the beard stays soft. It takes about four weeks to grow enough length to shape, and the result is worth the wait.

Man with a beard wearing a hat and glasses in a barbershop, showing how accessories frame a diamond face shape

Hairstyles to Avoid for a Diamond Face

Some styles make a diamond face look sharper, and it helps to know them before you sit in the chair. A blunt bob that ends right at the chin draws a hard line across the narrowest part of the face. A centre part with no layers leaves the forehead and the cheekbones bare, and a heavy full fringe covers the forehead without adding width. Very short pixie cuts, tight pulled back styles and slicked back buns pull the hair away from the face and show every angle. A lot of volume right at the cheekbones is also a mistake, because it makes the widest part of the face even wider. The same goes for long hair with no layers, which hangs flat and adds nothing at the forehead or the jaw. If your face is rounder than you thought, our guide to the best haircut for round face men shows the styles that add angles instead.

In my chair, the most common mistake I see is a centre part with straight, flat hair. The client usually tells me the face looks too sharp, and the fix is simple. I add a deep side part, a few soft layers and some movement at the ends, and the face looks softer at once. Small changes like these make a big difference, and they do not need a new cut.

Hairstyles to avoid for a diamond face shape

With the right cut, a diamond face is one of the most striking shapes there is.

Frequently Asked Questions

Frequently asked questions about diamond face shape hairstyles
What is the best hairstyle for a diamond face shape?

A style that adds width at the forehead and jaw and softens the cheekbones. Good choices are a deep side part with face framing layers, a chin length bob with wispy bangs, or a textured quiff for men.

Should someone with a diamond face get bangs?

Yes, if they are soft. Side swept bangs, curtain bangs or a wispy fringe work well, because they widen the forehead. Avoid a heavy blunt fringe or a full fringe that covers the whole forehead.

What hair length is best for a diamond face shape?

Chin to shoulder length is the most flattering for women, because it adds width right at the jaw. Men do well with short to medium length on top and fuller sides.

Is a burst fade good for a diamond face?

A burst fade can work if you keep it low and keep some fullness on the sides. A very high skin fade can make the face look sharper, so ask your barber for a low taper or a classic taper instead.

What hairstyles should a diamond face avoid?

Avoid blunt bobs that end at the chin, centre parts with no layers, tight pulled back styles, and a lot of volume right at the cheekbones. These styles make the face look sharper instead of softer.




Muhammad Asim Avatar

Muhammad Asim is a certified barber with 10+ years of experience in modern men’s grooming, fades, beard styling, and trend-focused hair transformations.


Please Write Your Comments
Comments (0)
Leave your comment.
Write a comment
INSTRUCTIONS:
  • Be Respectful
  • Stay Relevant
  • Stay Positive
  • True Feedback
  • Encourage Discussion
  • Avoid Spamming
  • No Fake News
  • Don't Copy-Paste
  • No Personal Attacks
`